Welcome to the official website of Jinan POPWIL Instrument Co., Ltd.!

24-Hour Hotline:

86-13705400632

Mobile Website

COPYRIGHT 2019  Jinan POPWIL Instrument Co., Ltd. 鲁ICP备09026430号-1 Powered by www.300.cn

Tel: 86-531-85661895 / Manager Lee: 86-13705400632

Add:East of Dangjia Town, 104 National Road, Shizhong District, Jinan City

Mobile Website

PRODUCTS

PRODUCTS CENTER

STRONG R&D DESIGN TEAM AND SERIOUS SERVICE SPIRIT PROVIDE COMPLETE SOLUTIONS FOR USERS IN METALLURGY AND PHYSICAL AND CHEMICAL TESTING INDUSTRY

Microcomputer controlled large span plate testing machine

Description
Technical Parameter

WDW-D microcomputer-controlled large-span board testing machine is mainly used for testing and researching the physical and mechanical properties of plywood, non-particle board, hard fiber board, structural and non-structural laminated veneer lumber, wood floor, bamboo floor, wood furniture, etc.

 

Determination of static bending strength and elastic modulus of long sample wood-based panels (three-point bending and four-point bending);

 

→ Bending load of long sample wood;

 

→ Bending performance, bending load, bending strength and bending elastic modulus of wood-based panel;

 

→ Total stripping rate, maximum stripping rate and characteristic strength of wood-based panel;

 

→ Determination of bonding strength in wood-based panels;

 

→ Determination method for bonding strength of wood-based panel surface

 

→ Determination of shear strength of wood-based panel adhesive layer: Through compressive load, the adhesive layer of the test piece is subjected to shear failure.

 

→ Determination of screw holding force of wood-based panel;

 

→ Determination of tensile strength and compressive strength, determination of compression strength parallel to grain; (ratio of compressive load of parallel to grain to cross-sectional area) and determination of guaranteed load;

Corresponding parameter set not found, please add it in property template of background

 

1. Testing machine grade: grade 0.5

2. Test force index:

Maximum:  100kN

Measurement range: 0.4%-100%

Accuracy: better than 0.5% of the indicated value

Resolution: ±300000 yards

3. Displacement:

Measurement accuracy: better than ±0.5% of the indicated value

Resolution: 0.01mm

4. Speed:

Range: 0.005mm/min ~ 500mm/min stepless speed regulation

Accuracy: better than 1% of the indicated value

5. Power supply of the main unit: 1.5kW, single line 220 V ±10%, 50Hz

6. Parameters of the main unit:

Tensile stroke: 550mm, compression space: 550mm, test width: 550 mm.

Maximum stroke of crossbeam: 1000mm

Overall dimensions of main unit (approx.): 920 mm×655mm×2050mm (length × width × height)

暂未实现,敬请期待
暂未实现,敬请期待